Due to the fact every piece is casted and hand finished to order by Sarah and Christian. The lee time is around 4-6 weeks. However this can vary on the pieces size, whether its limited edition or whether we have a piece ready to go already.

The Open Edition finish Cold Cast Mixed Metals was Pauls own take on recreating the patina that can be found on a foundry bronze. Like most patinas in bronze casting the finish is achieved using a mix of metals, chemicals, heat and water that our applied by hand giving each individual piece its own patina.

Pauls main goal was to make affordable art. He believed that anyone should be able to afford and enjoy his pieces. The Open Edition pieces offer just that. They have no limited number of editions and our made with a mix of resins and metal powder, thus making them much more affordable.

We offer shipping that is price dependent on the pieces size and whether or not it is going over seas. Once you fill out an enquiry the information about shipping costs will be included in our response. We use DPD for smaller UK shipping and a local pack and ship company for anything larger or overseas. We do offer collection, which of course is free, we do ask however that you enquire before making the trip.

We supply many galleries around the UK from which you can view and buy from. Click here for more info about Galleries. We also display Paul’s work at exhibitions in the spring and summer months. Click here for more info on exhibitions this year. We also do an open studio where we display the entire collection of Paul’s work. Info about that can be also be found on the exhibitions page.

Yes! Pauls sketch book is full of designs he never got to bring to life. Our goal is to bring some of those designs to life using the creative skills of the whole family.

If your sculpture is outside, it is of course subject to the weather. To clean the sculpture it is our recommendation that you first try soapy water and a sponge for any light stains. However if the stain/mark remains stubborn you can follow these steps subject to which finish you have.

Cold Cast Marble:

• 
  Take the bird inside, give it a wipe over and make sure it is completely dry

• In a circular motion use 240 grit sand paper on the affected area 

• If the staining persists use 150 grit sand paper 

• After the stain has been removed put some renaissance wax on to a cloth (micro-fibre or jay cloth) and apply a thin coat spread across the whole bird 

• Wait around a 30 minutes to an hour and then give the bird a good buff up/polish and the whole bird will be shiny again 

Cold Cast Mixed Metals, Pewter and Bronze:

As these finishes are more sensitive to the sand paper it is advised unless instructed to, to not use sand paper. Instead for any marks simply just use soapy water and a sponge.

If you are still stuck you can contact us here